Radon Zones in Minnesota: EPA County Map and Risk Data

Radon exposure is an invisible but significant health concern across Minnesota, with an estimated 638 radon-related lung cancer deaths per year statewide. Radon is the second-leading cause of lung cancer in the US and the leading cause among non-smokers. The map below shows EPA radon zone designations for every Minnesota county, helping you identify higher and lower risk areas.

—Counties Shown
—Zone 1 — High
—Zone 2 — Moderate
—Zone 3 — Low

Radon in Minnesota by the Numbers

  • 638 estimated radon-related lung cancer deaths per year in Minnesota (EPA / AARST)
  • 272,872 homes in Minnesota have been radon-tested according to AARST state data
  • $128M estimated annual medical cost burden from radon-induced lung cancer
  • $135M estimated total annual economic burden (medical + productivity)
  • The EPA action level is 4 pCi/L — any home in any zone can test above this threshold

EPA Radon Zone Distribution: Minnesota Counties

The EPA divides US counties into three radon potential zones based on geology, atmospheric conditions, and indoor radon measurements. Zone 1 counties have the highest predicted indoor radon potential; Zone 3 the lowest. These designations are regional predictions, not measurements of individual homes.

EPA ZoneRisk LevelPredicted Indoor AverageMinnesota Counties
Zone 1HighGreater than 4 pCi/L68
Zone 2Moderate2 to 4 pCi/L19
Zone 3LowLess than 2 pCi/LN/A

Important: Homes in Zone 2 and Zone 3 counties can still test above 4 pCi/L. EPA zones reflect average geological potential, not individual home measurements. Testing is the only reliable way to know your radon exposure.

Minnesota Radon Policy and Regulations

Minnesota maintains several radon-related policies and requirements: Minnesota has some radon-related policies in place:

  • ✓ State radon certification program
  • ✓ Radon concentration standards
  • ✓ Homebuyer disclosure required
  • ✓ New home radon system required
  • ✗ School radon testing required
  • ✗ New school radon system required

Frequently Asked Questions

What is a safe radon level in Minnesota?

The EPA recommends taking action if radon levels reach 4 pCi/L or higher. The US national average indoor radon level is about 1.3 pCi/L. Levels between 2 and 4 pCi/L also merit consideration of mitigation. There is no established “safe” level — any radon exposure carries some cancer risk.

How do I test for radon in Minnesota?

Short-term radon test kits (2 to 7 days) are widely available at hardware stores and online for around $15 to $30. Long-term tests (90 or more days) provide a more accurate picture of your annual average exposure. Minnesota operates a state radon certification program — you can find certified professionals through the state health department.

How much does radon mitigation cost in Minnesota?

Radon mitigation systems typically cost $800 to $2,500 installed, depending on foundation type and radon levels. Sub-slab depressurization is the most common approach and reduces radon by up to 99% in most homes. Given that Minnesota sees an estimated 638 radon-related lung cancer deaths per year, the cost is modest relative to the health benefit.

Explore the national US Radon Zones Map to compare Minnesota to every other state and see county-level EPA zone data across the country.

About the Author
I'm Daniel O'Donohue, the voice and creator behind The MapScaping Podcast ( A podcast for the geospatial community ). With a professional background as a geospatial specialist, I've spent years harnessing the power of spatial to unravel the complexities of our world, one layer at a time.