PFAS in Ohio drinking water
141 drinking-water utilities in Ohio reported PFAS detections at or above the EPA minimum reporting level under UCMR 5 (the federal monitoring round that ran 2023–2025). Of those, 61 exceeded the final EPA Maximum Contaminant Level for PFOA or PFOS (4 parts per trillion), serving roughly 3,973,095 people.
By the numbers
- 141 Ohio water utilities with at least one PFAS compound detected
- 5,828,872 people served by those utilities
- 61 utilities above the final 4 ppt MCL for PFOA or PFOS
- 16 federal and Department of Defense sites with reported PFAS in groundwater
The interactive map below plots every reporting Ohio utility, colour-coded by whether their worst reading exceeds the federal MCL, sits below it but at or above the reporting threshold, or falls below the reporting threshold. Use the search box to find a specific utility, ZIP code or address.
Top Ohio water utilities by PFAS impact
The 15 Ohio public water systems with the most significant PFAS detections under UCMR 5, ranked by how far each system’s worst MCL-exceeding compound runs over the federal limit:
| # | Utility | Population served | Headline ng/L | Compound | vs MCL |
|---|---|---|---|---|---|
| 1 | City of Cleveland Heights | 46,000 | 400.0 | PFOS | 100.0× final MCL |
| 2 | Lima City | 65,619 | 45.0 | PFOS | 11.3× final MCL |
| 3 | Kings Island PWS | 31,753 | 28.9 | PFOS | 7.2× final MCL |
| 4 | Aqua Ohio – Struthers | 58,551 | 27.0 | PFOA | 6.8× final MCL |
| 5 | Wright-Patterson AFB Area A PWS | 16,551 | 25.0 | PFOA | 6.3× final MCL |
| 6 | Warren Comm W and S Assn 2 | 7,215 | 20.0 | PFOA | 5.0× final MCL |
| 7 | Mcdonald Village PWS | 3,172 | 18.0 | PFOS | 4.5× final MCL |
| 8 | Putnam Community Water Association PWS | 2,744 | 16.9 | PFOA | 4.2× final MCL |
| 9 | Loveland City PWS | 12,800 | 15.9 | PFOS | 4.0× final MCL |
| 10 | Wright-Patterson AFB Area B PWS | 11,034 | 14.0 | PFOS | 3.5× final MCL |
| 11 | Trumbull Co.-Howland Twp PWS | 5,783 | 13.0 | PFOS | 3.3× final MCL |
| 12 | Caldwell Village PWS | 7,550 | 13.0 | PFOA | 3.3× final MCL |
| 13 | Canfield City PWS | 7,767 | 12.4 | PFOS | 3.1× final MCL |
| 14 | Indian Hill City PWS | 15,000 | 10.9 | PFOS | 2.7× final MCL |
| 15 | Western Water Company | 40,000 | 10.7 | PFOS | 2.7× final MCL |
Use the interactive map above to find every utility (not just the top 15) and to search by ZIP code or address.
The biggest Ohio systems above the PFOA/PFOS MCL
Ranked by population served, the largest Ohio water utilities reporting at least one PFAS reading above EPA’s final MCL:
| # | Utility | Population served | Worst compound | Reading | vs MCL |
|---|---|---|---|---|---|
| 1 | Columbus Public Water System | 1,277,848 | PFOA | 5.3 ng/L | 1.3× MCL |
| 2 | Cincinnati Public Water System | 750,200 | PFOS | 6.1 ng/L | 1.5× MCL |
| 3 | Akron City PWS | 280,000 | PFOA | 7.3 ng/L | 1.8× MCL |
| 4 | Del-Co Water Company, Inc. | 150,000 | PFOA | 4.2 ng/L | 1.1× MCL |
| 5 | Montgomery County Water Services 1 PWS | 148,312 | PFOS | 9.6 ng/L | 2.4× MCL |
| 6 | Youngstown City PWS | 148,000 | PFOS | 7.0 ng/L | 1.8× MCL |
| 7 | Dayton Public Water System | 140,407 | PFOS | 7.3 ng/L | 1.8× MCL |
| 8 | Clermont Public Water System | 133,059 | PFOS | 8.3 ng/L | 2.1× MCL |
| 9 | Montgomery County Water Services 2 PWS | 82,784 | PFOS | 6.2 ng/L | 1.6× MCL |
| 10 | Lima City | 65,619 | PFOS | 45.0 ng/L | 11.3× MCL |
PFAS compounds detected in Ohio
UCMR 5 required utilities to test for 29 different PFAS compounds. The table below shows how many Ohio utilities had at least one above-reporting-level result for each compound, sorted by frequency:
| Compound | Ohio utilities | Share of detecting utilities | EPA MCL |
|---|---|---|---|
| PFBA | 66 | 47% | None |
| PFBS | 55 | 39% | None |
| PFPeA | 54 | 38% | None |
| PFHxA | 42 | 30% | None |
| PFOA | 38 | 27% | 4 ppt (final) |
| PFOS | 33 | 23% | 4 ppt (final) |
| PFHxS | 29 | 21% | 10 ppt (April 2024, under reconsideration) |
| PFHpA | 7 | 5% | None |
| HFPO-DA | 4 | 3% | 10 ppt (April 2024, under reconsideration) |
| PFNA | 3 | 2% | 10 ppt (April 2024, under reconsideration) |
| 6:2 FTS | 2 | 1% | None |
Where Ohio’s PFAS contamination is coming from
EPA’s PFAS Analytic Tools also catalogue the suspected industrial, federal and accidental sources of PFAS in each state. Ohio has 16 federal facilities (mostly U.S. military installations and federal airports) reporting PFAS in groundwater, 11 EPA Superfund sites flagged for PFAS, and 30 recorded PFAS-related spills (18 of which reached surface water).
Federal and DoD sites with the highest PFAS in groundwater
The U.S. Department of Defense has reported PFAS contamination at hundreds of installations nationwide, largely tied to decades of fire-training exercises with PFAS-based firefighting foams (AFFF). These readings are taken from monitoring wells at the source site, not from drinking-water taps, but plumes from these sites are a known route into nearby public and private water supplies. Readings are in parts per trillion (ppt) of PFOS and PFOA respectively:
| Site | Agency | Max PFOS (groundwater) | Max PFOA (groundwater) |
|---|---|---|---|
| Youngstown Air Reserve Station | Air Force | 54,000 ppt | 11,000 ppt |
| Toledo Express | Air Force | 47,000 ppt | 690 ppt |
| Mansfield | Air Force | 21,900 ppt | 18,800 ppt |
| Rickenbacker | Air Force | 14,400 ppt | 45,800 ppt |
| Wright Patterson AFB | Air Force | 6,600 ppt | 610 ppt |
Superfund sites flagged for PFAS in Ohio
EPA’s Superfund program has identified the following Ohio sites with confirmed PFAS detections:
- Buckeye Reclamation, St. Clairsville, Belmont County. NPL status: Deleted. EPA site report
- Chemical Recovery Systems, Elyria, Lorain County. NPL status: Not on NPL. EPA site report
- Dover Chemical Corp., Dover, Tuscarawas County. NPL status: Proposed. EPA site report
- Industrial Excess Landfill, Uniontown, Stark County. NPL status: Final. EPA site report
- Lammers Barrel Factory, Beavercreek, Greene County. NPL status: Final. EPA site report
Recent PFAS-related spills in Ohio
- 2025: Pfos released in Oregon (Lucas County) by Ohio Refining Company.
- 2025: Fire fighting liquid released in Oregon (Lucas County) by Ohio Refining Company.
- 2025: Perfluoroalkyl substances (pfas) released in Cleveland (Cuyahoga County) by Milliporesigma.
- 2024: Aqueous film-forming foam (AFFF) released in Circleville (Pickaway County) by Ppg Industries. Reached water.
- 2024: 5 gallons of aqueous film-forming foam (AFFF) released in Columbus (Franklin County) by Republic Services.
What “exceeds the MCL” means here
In April 2024 the EPA finalised the first-ever federal Maximum Contaminant Levels (MCLs) for six PFAS compounds in drinking water. The two most consequential are PFOA and PFOS, both set at 4.0 nanograms per litre (ng/L) — equivalent to 4 parts per trillion. Every red marker on the map above represents a Ohio water system whose most-recent UCMR 5 result for PFOA or PFOS sat above 4 ng/L.
EPA also issued individual MCLs of 10 ng/L for PFHxS, PFNA and HFPO-DA (GenX) and a Hazard-Index MCL covering mixtures. In May 2025 the agency confirmed the PFOA and PFOS limits would stay in place (with the compliance deadline extended to 2031), and announced its intent to rescind the four other limits. We continue to flag exceedances of the published April 2024 MCL for those compounds and label them as “under EPA reconsideration” so the rule status is honest and current.
Yellow markers mean PFAS were detected at or above EPA’s reporting threshold (the minimum reporting level) but no individual compound exceeded an MCL. Detection at any level is not necessarily a regulatory violation, but it is a signal that PFAS treatment may be needed before the 2031 compliance deadline.
Methodology and data sources
- Drinking-water detections: EPA PFAS Analytic Tools, UCMR 5 layer. Filtered to Ohio samples at or above the minimum reporting level. We aggregate the raw 2023–2025 sample records to one entry per public water system, taking the most-recent reading per compound.
- Superfund sites: EPA PFAS Analytic Tools, Superfund-with-PFAS layer. Includes National Priorities List sites and Superfund Alternative Approach sites where PFAS has been detected.
- Federal and DoD sites: EPA PFAS Analytic Tools, federal-sites layer. PFOA and PFOS values are maximum readings from groundwater monitoring wells at each installation, not finished drinking water.
- Spills: EPA PFAS Analytic Tools, spills layer. Covers reported releases involving PFAS-containing materials.
UCMR 5 only required community water systems serving 3,300 or more people, plus a representative sample of smaller systems, to test for PFAS. Private wells, very small public systems, and bottled water are not in this dataset. Absence of a dot on the map does not mean absence of PFAS.
What you can do
- Check whether your utility appears in the table above or on the map. If it does, your utility is required to come into compliance with the federal PFOA/PFOS MCL by 2031 — usually via granular activated carbon, ion-exchange resin or reverse osmosis treatment.
- If you are on a private well in or near a flagged area, consider independent PFAS testing through a state-certified laboratory.
- Look up your most recent Consumer Confidence Report (CCR), which utilities are required to publish annually. PFAS results from UCMR 5 must now appear there.
- If you want point-of-use protection, only filters certified to NSF/ANSI 53 or NSF/ANSI 58 for PFOA and PFOS reduction will reliably remove PFAS.
