Kansas has 763 EPA-permitted industrial stormwater facilities — auto scrapyards, concrete plants, mines, sawmills, refuse haulers, plating shops and trucking terminals whose runoff is legally allowed to reach local rivers, lakes and storm sewers under the state’s industrial stormwater permitting programme. The interactive map below shows every one of those facilities, plotted directly from the EPA Enforcement and Compliance History Online (ECHO) Industrial Stormwater feed. Click any point for the facility name, address and Standard Industrial Classification (SIC) code, switch to satellite imagery to see what waterway sits next door, or search by name, city or ZIP within Kansas.
Kansas Industrial Stormwater by the Numbers
Kansas’s 763 permittees represent 0.8% of every industrial stormwater facility in the EPA federal database, putting the state in EPA Region 7. That ranks Kansas 29th of 37 reporting states in the federal locator. The state’s permit programme is administered by the Kansas Department of Health and Environment (KDHE) through the Kansas Industrial Stormwater General Permit, KDHE coordinates with the Bureau of Water for permit issuance and compliance inspections.
Where Kansas’s Industrial Facilities Cluster
Wichita leads the state with 95 permitted industrial stormwater facilities, followed by Kansas City and Topeka. The 10 Kansas cities with the most permittees:
- Wichita — 95 facilities
- Kansas City — 50 facilities
- Topeka — 36 facilities
- Salina — 20 facilities
- Olathe — 20 facilities
- New Century — 19 facilities
- Hutchinson — 18 facilities
- Emporia — 16 facilities
- Lenexa — 13 facilities
- Mcpherson — 12 facilities
The Industries Behind Kansas’s Permits
The single largest industrial stormwater sector in Kansas is Refuse systems (landfills, transfer stations), with 59 permitted sites. The 10 most common Standard Industrial Classification (SIC) codes among Kansas permittees:
- SIC 4953, Refuse systems (landfills, transfer stations) — 59 facilities
- SIC 5093, Scrap and waste materials wholesale — 22 facilities
- SIC 3728 — 21 facilities
- SIC 2951, Asphalt paving mixtures and blocks — 19 facilities
- SIC 4952, Sewerage systems — 18 facilities
- SIC 4581, Airports and flying fields — 16 facilities
- SIC 4011, Railroads, line-haul — 16 facilities
- SIC 1389, Services for oil and gas extraction — 16 facilities
- SIC 4213, Trucking, long distance — 13 facilities
- SIC 5015, Motor vehicle parts (used), auto dismantlers and salvage yards — 13 facilities
The mix tells you which industries dominate Kansas’s industrial stormwater footprint — and therefore what kinds of pollutants are most likely to enter local waterways during a storm. Each sector has its own benchmark monitoring requirements under the permit (zinc and copper for scrap metal, total suspended solids for aggregate, oil and grease for petroleum bulk, pH for concrete).
Kansas’s Industrial Stormwater Regulator
Industrial stormwater coverage in Kansas is issued and enforced by the Kansas Department of Health and Environment (KDHE). The state operates the Kansas Industrial Stormwater General Permit, KDHE coordinates with the Bureau of Water for permit issuance and compliance inspections. Every permittee is required to develop and implement a Stormwater Pollution Prevention Plan (SWPPP), conduct routine and annual visual inspections, monitor benchmark pollutants for their sector, and file electronic Discharge Monitoring Reports. Civil penalties for unpermitted discharge or permit violations under the Clean Water Act run up to roughly $66,000 per day per violation.
How to Use This Map
Type a business name, city or ZIP into the search box and press Enter to filter the map within Kansas. Click any blue marker for the facility name, full address and SIC industry classification. Switch the basemap to Satellite in the top-right control to see what each facility actually looks like from the air, and what river, creek or shoreline sits next door — that’s where the stormwater goes. Click My location to centre the map on your address and see how many permitted industrial sites operate within a few miles of where you live or work.
Frequently Asked Questions
How many industrial stormwater facilities are in Kansas?
The EPA federal locator currently lists 763 industrial facilities with active stormwater permit coverage in Kansas. The figure is pulled live from the EPA ECHO Facility Finder service and refreshes as the state agency pushes updates.
Which industries dominate Kansas’s industrial stormwater permittees?
The largest single sector in Kansas is Refuse systems (landfills, transfer stations) (59 sites). The top 10 sectors above account for the bulk of permittees, but the dataset includes 11 federal MSGP sector categories overall, ranging from heavy manufacturing through transportation and warehousing to mining and refuse handling.
Where can I see inspection or violation history?
The Facility Finder layer shown on this map does not currently expose the NPDES permit number or inspection and violation history. To see enforcement records, search the same facility on EPA ECHO’s main facility search, or contact the Kansas Department of Health and Environment (KDHE) directly for a state-level public records request.
How do I report an industrial stormwater violation in Kansas?
EPA accepts public tips at echo.epa.gov/report-environmental-violations. You can also contact the Kansas Department of Health and Environment (KDHE) directly. Photographs of visible discharge to a waterway, especially during or after rain events, are particularly useful.
View all 95,925 EPA-permitted industrial stormwater facilities on the national map →




