Iowa Air Pollution & Cancer Risk Map

In parts of Iowa, the lifetime cancer risk from breathing hazardous air pollutants reaches more than 500 cases in a million people — well above the EPA’s “presumptively acceptable” benchmark of 100 in a million.

Across the state’s 124,175 populated census blocks, the population-weighted average lifetime cancer risk from hazardous air pollutants is 23.5 per million — and the main driver isn’t industrial smokestacks. It’s secondary atmospheric formation (sunlight-driven reactions).

Formaldehyde, Carbon tetrachloride, and Acetaldehyde together account for the majority of measured airborne cancer risk in Iowa. The map below shows census-tract-level exposure, with click-through to source breakdowns and pollutant-specific data for every block.

Iowa air-toxics cancer risk at a glance

  • Population covered: 3,190,369
  • Census tracts analyzed: 894
  • Census blocks analyzed: 124,175
  • Population-weighted statewide average cancer risk: 23.5 per million people
  • Highest single-block risk in Iowa: 500 per million (in Polk County)
  • Census blocks with risk above 50 per million: 220 (0.2% of populated blocks)
  • Census blocks with risk above 100 per million: 53 (0% of populated blocks)

Counties with the highest cancer risk in Iowa

These are the ten Iowa counties with the highest population-weighted average cancer risk from inhaled hazardous air pollutants. Each row reflects the average across every populated census block within the county.

RankCountyPopulationAvg cancer risk (per million)Largest source contribution
1Polk County492,40132.8Industrial point (6.6)
2Dallas County99,67826.5Industrial point (2.5)
3Linn County230,29926.5Nonpoint (2.7)
4Des Moines County38,91025.9Nonpoint (1.5)
5Johnson County152,85424.9Nonpoint (2.3)
6Pottawattamie County93,66724.9Nonpoint (2.6)
7Scott County174,66924.8Nonpoint (2.6)
8Warren County52,40323.5Nonpoint (2.1)
9Lee County33,55522.9Nonpoint (1.4)
10Jefferson County15,66321.2Industrial point (1.3)

What chemicals drive cancer risk in Iowa

Air-toxics cancer risk is the sum of contributions from dozens of individual hazardous air pollutants. These are the chemicals responsible for the largest share of Iowa’s population-weighted average risk.

RankPollutantAvg cancer risk (per million)Share of state-average risk
1Formaldehyde15.766.6%
2Carbon tetrachloride2.912.5%
3Acetaldehyde1.46.1%
4Ethylene oxide1.35.6%
5Benzene0.94%
6Naphthalene0.83.4%
7PAHs and POMs0.72.8%
81,3-butadiene0.21%

Where Iowa’s air-toxics cancer risk comes from

The same chemicals can come from very different places. EPA’s source-attribution model splits each block’s risk across categories like on-road traffic, off-road equipment, stationary industrial facilities, wildfires, and atmospheric secondary formation. In Iowa, the contributions break down like this:

Source categoryAvg cancer risk (per million)Share of total
Secondary atmospheric formation (sunlight-driven reactions)14.661.9%
Long-range regional background2.912.5%
Nonpoint sources (commercial cooking, oil and gas operations, wood smoke, solvents)2.08.5%
Stationary industrial facilities (refineries, chemical plants, power generation)1.56.5%
Biogenic emissions (vegetation)1.56.5%
On-road vehicles (cars, trucks, buses)0.73.2%
Wildfire smoke0.62.7%
Off-road equipment (construction, marine, rail, aviation)0.62.4%

Iowa’s most exposed census blocks

These are the ten Iowa census blocks with the highest measured cancer risk from breathing hazardous air pollutants. Census blocks are the smallest geographic unit reported by the US Census Bureau — these communities typically range from a few hundred to a few thousand residents.

RankCountyBlock residentsCancer risk (per million)
1Polk County598500
2Polk County75500
3Polk County60400
4Polk County26400
5Polk County78400
6Clinton County5300
7Polk County63300
8Jefferson County8200
9Polk County253200
10Polk County59200

How to read the cancer risk numbers

The numbers on the map and in the tables above are cases per one million people, projected over a 70-year lifetime of continuous exposure at the modeled air-toxics concentration. EPA uses two reference benchmarks when interpreting these values:

  • 1 in a million — the threshold EPA describes as a “negligible” lifetime cancer risk from a single pollutant under the Clean Air Act.
  • 100 in a million — the upper bound EPA describes as “presumptively acceptable” when considering combined risk from all hazardous air pollutants.

A census block with a cancer risk of 80 per million means EPA’s modeling estimates that, out of one million people breathing that block’s air continuously for 70 years, an additional 80 would develop cancer as a direct result of inhalation exposure to the modeled mix of hazardous air pollutants — above the cancer cases that would have occurred from other causes.

What the map cannot tell you

  • This is modeled exposure based on emissions inventories and atmospheric dispersion, not direct air monitoring. A handful of locations have routine measurement; for most blocks the value reflects modeled concentrations.
  • It covers inhalation cancer risk only — it does not account for cancer risks from drinking water, occupational exposure, food, or non-cancer respiratory and neurological effects.
  • Values reflect outdoor ambient air. Indoor air, where most people spend most of their time, can have very different concentrations of many of these pollutants.
  • The model uses 2020 emissions data — facility closures, fleet turnover, or regulatory changes since then are not reflected.

About the data

Source data: EPA’s AirToxScreen 2020, the agency’s nationwide screening-level assessment of cancer and respiratory risk from inhalation of hazardous air pollutants. AirToxScreen replaces the older National Air Toxics Assessment (NATA), which was last published with 2014 data. AirToxScreen reports risk at the census-block level and includes both individual pollutant concentrations and source-category attribution. We aggregate block-level data to the census tract for the choropleth display using population-weighted averaging, so the colors on the map reflect average exposure for the people who actually live in each tract.

Related state air-pollution maps

Continue exploring air-toxics cancer risk in nearby states:

About the Author
I'm Daniel O'Donohue, the voice and creator behind The MapScaping Podcast ( A podcast for the geospatial community ). With a professional background as a geospatial specialist, I've spent years harnessing the power of spatial to unravel the complexities of our world, one layer at a time.