Hawaii Industrial Stormwater Map: 216 EPA-Permitted Sites

Hawaii has 216 EPA-permitted industrial stormwater facilities — auto scrapyards, concrete plants, mines, sawmills, refuse haulers, plating shops and trucking terminals whose runoff is legally allowed to reach local rivers, lakes and storm sewers under the state’s industrial stormwater permitting programme. The interactive map below shows every one of those facilities, plotted directly from the EPA Enforcement and Compliance History Online (ECHO) Industrial Stormwater feed. Click any point for the facility name, address and Standard Industrial Classification (SIC) code, switch to satellite imagery to see what waterway sits next door, or search by name, city or ZIP within Hawaii.

216
Permitted facilities
–
In current view
Hawaii
State
EPA-permitted industrial stormwater facility

Hawaii Industrial Stormwater by the Numbers

Hawaii’s 216 permittees represent 0.2% of every industrial stormwater facility in the EPA federal database, putting the state in EPA Region 9. That ranks Hawaii 37th of 37 reporting states in the federal locator. The state’s permit programme is administered by the Hawaii Department of Health (HDOH), Clean Water Branch through the Hawaii NGPC Industrial Stormwater General Permit, Hawaii’s permittee base is dominated by ports, airports, marine terminals and small island industrial facilities.

Where Hawaii’s Industrial Facilities Cluster

Honolulu leads the state with 95 permitted industrial stormwater facilities, followed by Kapolei and Lihue. The 10 Hawaii cities with the most permittees:

  1. Honolulu — 95 facilities
  2. Kapolei — 34 facilities
  3. Lihue — 14 facilities
  4. Kahului — 8 facilities
  5. Pearl City — 6 facilities
  6. Waipahu — 6 facilities
  7. Aiea — 5 facilities
  8. Puunene — 5 facilities
  9. Waianae — 4 facilities
  10. Hilo — 3 facilities

The Industries Behind Hawaii’s Permits

The single largest industrial stormwater sector in Hawaii is , with 0 permitted sites. The 10 most common Standard Industrial Classification (SIC) codes among Hawaii permittees:

The mix tells you which industries dominate Hawaii’s industrial stormwater footprint — and therefore what kinds of pollutants are most likely to enter local waterways during a storm. Each sector has its own benchmark monitoring requirements under the permit (zinc and copper for scrap metal, total suspended solids for aggregate, oil and grease for petroleum bulk, pH for concrete).

Hawaii’s Industrial Stormwater Regulator

Industrial stormwater coverage in Hawaii is issued and enforced by the Hawaii Department of Health (HDOH), Clean Water Branch. The state operates the Hawaii NGPC Industrial Stormwater General Permit, Hawaii’s permittee base is dominated by ports, airports, marine terminals and small island industrial facilities. Every permittee is required to develop and implement a Stormwater Pollution Prevention Plan (SWPPP), conduct routine and annual visual inspections, monitor benchmark pollutants for their sector, and file electronic Discharge Monitoring Reports. Civil penalties for unpermitted discharge or permit violations under the Clean Water Act run up to roughly $66,000 per day per violation.

How to Use This Map

Type a business name, city or ZIP into the search box and press Enter to filter the map within Hawaii. Click any blue marker for the facility name, full address and SIC industry classification. Switch the basemap to Satellite in the top-right control to see what each facility actually looks like from the air, and what river, creek or shoreline sits next door — that’s where the stormwater goes. Click My location to centre the map on your address and see how many permitted industrial sites operate within a few miles of where you live or work.

Frequently Asked Questions

How many industrial stormwater facilities are in Hawaii?

The EPA federal locator currently lists 216 industrial facilities with active stormwater permit coverage in Hawaii. The figure is pulled live from the EPA ECHO Facility Finder service and refreshes as the state agency pushes updates.

Which industries dominate Hawaii’s industrial stormwater permittees?

The largest single sector in Hawaii is (0 sites). The top 10 sectors above account for the bulk of permittees, but the dataset includes 11 federal MSGP sector categories overall, ranging from heavy manufacturing through transportation and warehousing to mining and refuse handling.

Where can I see inspection or violation history?

The Facility Finder layer shown on this map does not currently expose the NPDES permit number or inspection and violation history. To see enforcement records, search the same facility on EPA ECHO’s main facility search, or contact the Hawaii Department of Health (HDOH), Clean Water Branch directly for a state-level public records request.

How do I report an industrial stormwater violation in Hawaii?

EPA accepts public tips at echo.epa.gov/report-environmental-violations. You can also contact the Hawaii Department of Health (HDOH), Clean Water Branch directly. Photographs of visible discharge to a waterway, especially during or after rain events, are particularly useful.

View all 95,925 EPA-permitted industrial stormwater facilities on the national map →

About the Author
I'm Daniel O'Donohue, the voice and creator behind The MapScaping Podcast ( A podcast for the geospatial community ). With a professional background as a geospatial specialist, I've spent years harnessing the power of spatial to unravel the complexities of our world, one layer at a time.