Georgia has 2,079 EPA-permitted industrial stormwater facilities — auto scrapyards, concrete plants, mines, sawmills, refuse haulers, plating shops and trucking terminals whose runoff is legally allowed to reach local rivers, lakes and storm sewers under the state’s industrial stormwater permitting programme. The interactive map below shows every one of those facilities, plotted directly from the EPA Enforcement and Compliance History Online (ECHO) Industrial Stormwater feed. Click any point for the facility name, address and Standard Industrial Classification (SIC) code, switch to satellite imagery to see what waterway sits next door, or search by name, city or ZIP within Georgia.
Georgia Industrial Stormwater by the Numbers
Georgia’s 2,079 permittees represent 2.2% of every industrial stormwater facility in the EPA federal database, putting the state in EPA Region 4. That ranks Georgia 15th of 37 reporting states in the federal locator. The state’s permit programme is administered by the Georgia Environmental Protection Division (Georgia EPD) through the GAR050000 NPDES Industrial Stormwater General Permit, with regional offices coordinating Watershed Protection Branch enforcement.
Where Georgia’s Industrial Facilities Cluster
Atlanta leads the state with 111 permitted industrial stormwater facilities, followed by Savannah and Augusta. The 10 Georgia cities with the most permittees:
- Atlanta — 111 facilities
- Savannah — 58 facilities
- Augusta — 57 facilities
- Gainesville — 46 facilities
- Dalton — 42 facilities
- Macon — 38 facilities
- Cartersville — 32 facilities
- Albany — 30 facilities
- Columbus — 28 facilities
- Lithonia — 27 facilities
The Industries Behind Georgia’s Permits
The single largest industrial stormwater sector in Georgia is Ready-mixed concrete, with 113 permitted sites. The 10 most common Standard Industrial Classification (SIC) codes among Georgia permittees:
- SIC 3273, Ready-mixed concrete — 113 facilities
- SIC 4212, Local trucking, without storage — 62 facilities
- SIC 5093-01 — 57 facilities
- SIC 2951, Asphalt paving mixtures and blocks — 53 facilities
- SIC LF — 42 facilities
- SIC 5015, Motor vehicle parts (used), auto dismantlers and salvage yards — 39 facilities
- SIC 2421, Sawmills and planing mills — 28 facilities
- SIC 1423 — 27 facilities
- SIC 5093-02 — 23 facilities
- SIC TW — 21 facilities
The mix tells you which industries dominate Georgia’s industrial stormwater footprint — and therefore what kinds of pollutants are most likely to enter local waterways during a storm. Each sector has its own benchmark monitoring requirements under the permit (zinc and copper for scrap metal, total suspended solids for aggregate, oil and grease for petroleum bulk, pH for concrete).
Georgia’s Industrial Stormwater Regulator
Industrial stormwater coverage in Georgia is issued and enforced by the Georgia Environmental Protection Division (Georgia EPD). The state operates the GAR050000 NPDES Industrial Stormwater General Permit, with regional offices coordinating Watershed Protection Branch enforcement. Every permittee is required to develop and implement a Stormwater Pollution Prevention Plan (SWPPP), conduct routine and annual visual inspections, monitor benchmark pollutants for their sector, and file electronic Discharge Monitoring Reports. Civil penalties for unpermitted discharge or permit violations under the Clean Water Act run up to roughly $66,000 per day per violation.
How to Use This Map
Type a business name, city or ZIP into the search box and press Enter to filter the map within Georgia. Click any blue marker for the facility name, full address and SIC industry classification. Switch the basemap to Satellite in the top-right control to see what each facility actually looks like from the air, and what river, creek or shoreline sits next door — that’s where the stormwater goes. Click My location to centre the map on your address and see how many permitted industrial sites operate within a few miles of where you live or work.
Frequently Asked Questions
How many industrial stormwater facilities are in Georgia?
The EPA federal locator currently lists 2,079 industrial facilities with active stormwater permit coverage in Georgia. The figure is pulled live from the EPA ECHO Facility Finder service and refreshes as the state agency pushes updates.
Which industries dominate Georgia’s industrial stormwater permittees?
The largest single sector in Georgia is Ready-mixed concrete (113 sites). The top 10 sectors above account for the bulk of permittees, but the dataset includes 11 federal MSGP sector categories overall, ranging from heavy manufacturing through transportation and warehousing to mining and refuse handling.
Where can I see inspection or violation history?
The Facility Finder layer shown on this map does not currently expose the NPDES permit number or inspection and violation history. To see enforcement records, search the same facility on EPA ECHO’s main facility search, or contact the Georgia Environmental Protection Division (Georgia EPD) directly for a state-level public records request.
How do I report an industrial stormwater violation in Georgia?
EPA accepts public tips at echo.epa.gov/report-environmental-violations. You can also contact the Georgia Environmental Protection Division (Georgia EPD) directly. Photographs of visible discharge to a waterway, especially during or after rain events, are particularly useful.
View all 95,925 EPA-permitted industrial stormwater facilities on the national map →




